How To Fix Accessories in Bathroom?Let The Bathroom Accessories Factory Tell You.

The installation method of bathroom accessories usually depends on the type and material of the accessories. Common installation methods include screw fixing, suction cups, and 3M self-adhesive. Below is a brief introduction to each method:

Screw Fixing: It is the most commonly used method for installing bathroom accessories, ensuring the most secure and safe installation. Since it involves drilling holes in the wall, extra care should be taken not to damage the tiles. The common steps are as follows:

• Firstly, determine the position of the accessory and mark the screw holes on the wall using a pencil.

• Next, use a drill and an appropriate-sized drill bit to drill holes at the marked positions.

• Then, align the base of the accessory with the holes and secure it to the wall using self-tapping screws.

• Finally, place the accessory on the base and tighten it with a hex wrench to ensure a secure fit.

This method is suitable for all types of bathroom accessories, especially heavier ones like brass or stainless steel  bathroom accessories.

Suction Cups: Originally used for plastic bathroom accessories, suction cups are now also used for lightweight wire iron accessories. The advantage of this method is its simplicity. However, after some months, the suction cups may harden and lose their grip, potentially causing the accessory to fall off. The installation method is as follows:

Start by cleaning both the accessory and the wall surface to ensure they are dry and clean.Then, press the accessory onto the desired position, ensuring the suction cups fully adhere and the accessory is stable.

3M Self-Adhesive or Glue Fixing: 3M self-adhesive or glue fixing have become popular in recent years. The advantage is easy installation without drilling holes, avoiding damage to the wall. However, like suction cups, there is a concern about the adhesive losing its effectiveness over time. The installation method is as follows:

• Begin by cleaning the bathroom accessory and the wall surface to ensure they are dry and clean.

• Peel off the protective film from the 3M self-adhesive and press the bathroom accessory onto the desired position with appropriate pressure to ensure a good bond.

• It's generally recommended to wait 48 hours before use to ensure the adhesive has fully bonded. For glue fixing, apply glue to the base of the bathroom accessory, fix it in the desired position, and secure with tape for 48 hours before removing the tape once it's solid.

Regardless of the chosen installation method, be sure to follow the instructions provided with the accessory and ensure it is installed on an appropriate wall surface to ensure safety and stability.

FAQ of our bathroom accessories installtion:

Q:What's method of your stainless steel bathroom accessories installtion?

A:Our accessories 95% are screw fixing because of heavy material.it will be more safety.

Q:Do you have other method for easy install of your stainless steel bathroom accessories?

A:We also have some small models use the 3M self-adhesive or glue fixing.our models have big wall plate.so it also can use for some years for safety.